Custom Bench
|
Users viewing this topic:
none
|
|
Logged in as: Guest
|
Login  | |
|
Custom Bench - 6/18/2005 9:57:47 PM
|
|
|
mindfreak
Posts: 523
Joined: 3/20/2005
From: Borneo Island
Status: offline
|
I've been thinking of making my own bench. There are a couple of good carpenters here. I was thinking what I'd need to get started. Just pure wood aint so recommended. Im betting it'd be much cheaper if I made my own. Any ideas? Feeling crazy and hyped right now...hardcore to the max!
_____________________________
It's times like these, you learn to live again... |
|
|
|
|
RE: Custom Bench - 6/20/2005 7:21:49 PM
|
|
|
Justincredible
Posts: 852
Joined: 5/28/2005
From: Los Angeles area, California
Status: offline
|
I wouldn't try it. It may be dangerous to use. Just get a gym membership or just buy the bench.
(in reply to mindfreak)
|
|
|
|
|
RE: Custom Bench - 6/20/2005 8:39:09 PM
|
|
|
The Sheep Man
Posts: 2465
Joined: 3/27/2005
Status: offline
|
wouldn't you just weld one rather than build with wood?
(in reply to Justincredible)
|
|
|
|
|
RE: Custom Bench - 6/21/2005 5:04:22 AM
|
|
|
mindfreak
Posts: 523
Joined: 3/20/2005
From: Borneo Island
Status: offline
|
lol...
i dunno..
its just a wild thought...
i was planning to build a home gym. build as in with hands...
welding the base of the bench is definitely important.
_____________________________
It's times like these, you learn to live again...
(in reply to The Sheep Man)
|
|
|
|
|
RE: Custom Bench - 6/21/2005 6:07:47 AM
|
|
|
The Sheep Man
Posts: 2465
Joined: 3/27/2005
Status: offline
|
do you have the tools for welding? make sure to test out the strength of the benches some how before using them, it would suck to be lowering 200lbs and the bench breaks under you, impailing you with a leg and leaving you crushed under the weight screaming for help but you are alone and eventually bleed to death and then are found the next morning... that would definately suck
(in reply to mindfreak)
|
|
|
|
|
RE: Custom Bench - 6/21/2005 6:29:28 AM
|
|
|
mindfreak
Posts: 523
Joined: 3/20/2005
From: Borneo Island
Status: offline
|
...
you convinced me well...
you get an A for imagination...
lol...
_____________________________
It's times like these, you learn to live again...
(in reply to The Sheep Man)
|
|
|
|
|
RE: Custom Bench - 6/21/2005 6:41:35 AM
|
|
|
The Sheep Man
Posts: 2465
Joined: 3/27/2005
Status: offline
|
just looking out for your well being, i don't want to read about this in the interent somewhere !
(in reply to mindfreak)
|
|
|
|
|
RE: Custom Bench - 6/21/2005 8:08:48 AM
|
|
|
mindfreak
Posts: 523
Joined: 3/20/2005
From: Borneo Island
Status: offline
|
Yea...
The hype in creating something is just so great..
Sudden creativity burst. I was thinking of fixing my own pull up bar so I thought...'why not make my own gym?' and crazy thoughts started flowing in and ....hahaha...
anyway..
thanks bro!
_____________________________
It's times like these, you learn to live again...
(in reply to The Sheep Man)
|
|
|
|
|
RE: Custom Bench - 6/23/2005 2:00:25 PM
|
|
|
8pack
Posts: 2245
Joined: 2/3/2004
From: Boca Raton, FL
Status: offline
|
nice idea, now i wanna do it too! if ima build anything why not a bench!
I did do the pull up idea already and it is waaay better then a pull up bar you can buy anywhere. I got a strong peice of metal cylinder with a hole through it and i got those thick, chrome tight looking chain to go through and out of both ends of the bar and screwed it on my hard cealing then I put on those dark gray foamy thing that goes over cylinders to make it look even tighter. I posted a picture of it on this site long ago, maybe you can find it. got everything needed from Home Depot.
The hardest part of making the pull up bar was drilling my cealing, it is sooo hard and tough to go through, took me about 20 mins to drill one of the holes and it was the best shoulder exercise I have ever had :)
(in reply to mindfreak)
|
|
|
|
|
RE: Custom Bench - 6/23/2005 9:35:44 PM
|
|
|
mindfreak
Posts: 523
Joined: 3/20/2005
From: Borneo Island
Status: offline
|
Sounds good...
Can your ceiling take your body weight?
_____________________________
It's times like these, you learn to live again... |
|
|
|
|
RE: Custom Bench - 6/24/2005 7:44:01 AM
|
|
|
8pack
Posts: 2245
Joined: 2/3/2004
From: Boca Raton, FL
Status: offline
|
yea thats where i was lucky, like i said the hardest part was drilling the ceiling. its a tough ceiling.
(in reply to mindfreak)
|
|
|
|
|
RE: Custom Bench - 6/24/2005 7:46:52 AM
|
|
|
The Sheep Man
Posts: 2465
Joined: 3/27/2005
Status: offline
|
concrete ceiling or something? or were you not using the right bit ;)
(in reply to 8pack)
|
|
|
|
|
RE: Custom Bench - 11/24/2005 9:08:40 PM
|
|
|
bodybuilding is life
Posts: 665
Joined: 11/18/2005
Status: offline
|
8pack how much can you bench and how old r u?
(in reply to The Sheep Man)
|
|
|
|
|
RE: Custom Bench - 11/28/2005 5:36:29 PM
|
|
|
ironraider52
Posts: 1353
Joined: 11/9/2005
Status: offline
|
I sure as heck wouldnt bench on a wooden bench. It would be scary as hell...but a home made gym would be really cool.
(in reply to bodybuilding is life)
|
|
|
|
|
RE: Custom Bench - 12/2/2005 1:36:30 PM
|
|
|
bodybuilding is life
Posts: 665
Joined: 11/18/2005
Status: offline
|
actualy my dads friend has a nice wooden bench. he made it himself and it is really sturdy. wish i could post a picture but i havn't seen him in like a year. happy lifting
(in reply to ironraider52)
|
|
|
|
|
RE: Custom Bench - 2/20/2007 11:04:26 PM
|
|
|
jeremy
Posts: 15
Joined: 7/17/2006
From: Stamford, CT
Status: offline
|
I do not think it is that complicated to make a bench. Be sure to use good steel pipe. Maybe 12 guage steel tubing or lower. You can get 3 x 3, 2 x 2, or 4 x 3 tubes to make the bench with. Look at some of the benches at the YMCA for ideas. There is some basic engineering to having pipes attached to all legs, going along under the back pad and between the uprights so that the legs do not bend out. U am not sure how they attach the upholstery. I know that they use ensolite padding and either naugahyde or saucony upholstery. You could use leather too if you want. It is alot of work to build just one. Maybe you could start a business. Let me know if you want me to help you sell them.
_____________________________
Jeremy Ulrich
Owner
http://bodybuilderfitness.com
(in reply to bodybuilding is life)
|
|
|
|
|
RE: Custom Bench - 2/23/2007 6:01:41 PM
|
|
|
connelly
Posts: 409
Joined: 2/12/2007
Status: offline
|
u could make one but with the time u could have a job and make the money to buy one most likely, unless u are doing it for experience. i wouldnt recomend it.
(in reply to jeremy)
|
|
|
|
|
RE: Custom Bench - 11/7/2007 7:37:55 PM
|
|
|
Red PittBull
Posts: 750
Joined: 10/28/2007
From: LaGrange, Georgia
Status: offline
|
Not nescarliy. All he needs is a normal bench and wrap some foam around it, then weild some other stuff to it, (Jerry Rigging 101) But hell for all that just do it on the damn floor...I wouldn't do anything HEAVY but just reps maybe..
< Message edited by Red PittBull -- 11/7/2007 7:39:12 PM >
(in reply to connelly)
|
|
|
|
|
|
Advertisement
|
|
|
|
|
 New Messages |
 No New Messages |
 Hot Topic w/ New Messages |
 Hot Topic w/o New Messages |
 Locked w/ New Messages |
 Locked w/o New Messages |
|
 Post New Thread
Reply to Message
Post New Poll
Submit Vote
Delete My Own Post
Delete My Own Thread
Rate Posts |
|
|
Printable Version
